
SonicSolutions® is the
state-of-the-art, ultrasonic algae control device that gets rid of
algae without harming other aquatic life. The SonicSolutions® unit
floats just below the water's surface and kills algae by producing a
precise frequency of ultrasonic waves that disrupts and destroys the
cellular functioning and structure of the algae. SonicSolutions® is
easy to use and is safe for all fish, plants, and other aquatic life,
and it can even help lower pH and TSS. SonicSolutions® is a safer and
more cost-effective water treatment than chemical algaecides for
pools, reservoirs, fish and farm ponds, lakes, lagoons, tanks, and
many other water management applications.
Safe for fish, plants, and other
aquatic life. |

 |
|
uses the resonance of the ultrasonic waves to
disrupt alga cells. The submerged transducer is programmed to generate
ultrasonic waves that are directed at the vacuole of the algae. These
waves weaken the cell membranes resulting in a leakage of cytoplasm
and a collapse of the cell into a dense brown mass. The cells may
remain buoyant for up to 4-5 weeks after exposure, although they are
no longer viable.
| Device |
Range |
Max. Effect Area-Muddy Bottom |
Max. Effect Area – Hard Bottom |
| SS 400 |
350 ft/108 m |
50,000 sq.ft./5,000 sq. m. |
200,000 sq.ft/20,000 sq. m. |
| SS 500 |
500 ft/154 m |
100,000 sq.ft/10,000 sq. m. |
400,000 sq.ft/40,000 sq. m. |
For optimal exposure of the ultrasonic
waves in the body of water, place the unit close to the edge of the
pond. Sonic waves extend only in front of the transducer unit. Larger
installations and certain shapes of ponds or lakes may require
installation of more than one unit. Multiple devices can be installed
at opposite sides of a lake or pond, or attached together pointing in
different directions, depending on the site requirements.
| SS 400 |
105-125V AC, 60 Hz, 0.4 Amps |
210-250V AC, 50 Hz, 0.2 Amps |
| SS 400-24* |
24V DC, 1.3 Amps |
|
| SS 500 |
105-125V AC, 60 Hz, 0.4 Amps |
210-250V AC, 50 Hz, 0.2 Amps |
| SS 500-24* |
24V DC, 2.0 Amps |
|
*Requires a minimum of two 105 deep
cycle 12v batteries wired in series required (not included in unit).
For Solar Panels, check with local supplier.
| Float |
15” x 15” x 1_”, with four æ” Tie
Down Holes and two 2” x 3_” Slots for Stakes |
| Transducer |
Length: 8”, Diameter: 3”, Height:
9”, Cord Length: 50’ |
| Float Shackle |
1 _” Length, Stainless Steel |
| Power Supply |
Depth: 2_”, Length: 7æ ”, Width:
4_” Cord Length: 6’ (US & EU), Cord Length: 5’ (UK) |
| Optional |
50’ or 100’ Transducer Extension |
| Accessories |
Cords (SJTOW) with Waterproof
Connectors |
| Shipping Weight |
21 lbs. (without optional
extension cord) |
|
|